Hipcam | Default Login

Wait 1–2 minutes for the camera to reboot. You can now configure it as a brand-new device. 4. Troubleshooting Hipcam Connection Issues

Occasionally, the default password is empty. 4. Resetting Your Hipcam to Factory Defaults (Hard Reset)

Connect your computer to the same network as your Hipcam. Use a network scanning tool (like Advanced IP Scanner) to find the IP address of your Hipcam device (e.g., 192.168.1.188 ).

Leaving your security camera on its default login settings makes it highly vulnerable to hackers and automated botnets. Once you successfully log in, prioritize these security configurations immediately: 1. Change the Default Password

Keep your Hipcam and plugged into an electrical outlet. hipcam default login

This address is used by Video Management Software (VMS) or dedicated apps to pull the raw video stream from your camera :

This is usually a small pinhole or button on the back or bottom of the camera.

If you are integrating the Hipcam into a third-party smart home system or NVR (Network Video Recorder), you may need to log in via a web browser.

Real-world consequences are not theoretical. Numerous news reports and cybersecurity databases (e.g., Shodan, CVE reports) have documented cases where unsecured Hipcam and similar OEM cameras were streamed live on public websites. Homeowners have found strangers speaking to their children through camera speakers, and small business owners have had their premises surveilled by competitors. The default login transforms a security tool into a surveillance instrument for the very people it was meant to exclude. Wait 1–2 minutes for the camera to reboot

Create a strong, unique password.

Many users also pair the device via the Hipcam Pro app. In the app, the same admin / 123456 pair is used when manually adding a camera by IP address.

When the login screen appears, enter the default username ( admin ) and the password found on your device sticker. If no password is listed, try leaving the field blank. 3. The Security Risks of Default Credentials

Create a strong, unique password for your camera. Avoid using your name, birthday, or simple words. A secure password should be at least 12 characters long and include a mix of uppercase letters, lowercase letters, numbers, and special symbols ( @ , # , $ , etc.). Enable Two-Factor Authentication (2FA) Use a network scanning tool (like Advanced IP

Complicating the issue is the nature of Hipcam as an original equipment manufacturer (OEM). Many off-brand or white-label cameras sold on e-commerce platforms actually run Hipcam firmware. Consequently, the default login problem extends far beyond devices bearing the Hipcam brand. A consumer might buy a “SuperVision 360” camera, unaware that its internal software is Hipcam-based, complete with the same admin /blank password vulnerability. Furthermore, firmware inconsistencies mean that while some devices force a password change on first login, many older or cheaper models do not. This fragmentation leaves a long tail of unpatched, vulnerable devices in the field years after their manufacture.

Alternatively, some users search for “Hipcam” in their app store and find a generic P2P app. The login process is the same: add device > manual add > enter IP and port > use admin / 123456 .

: This high-severity vulnerability (CVSS v3 score of 7.5) was found in Hipcam Cameras RealServer version 1.0. It allows a remote attacker with no privileges to cause a denial-of-service (DoS) condition, effectively crashing the surveillance system by sending a specially crafted script to the RTSP client_port parameter.