: Open a Command Prompt, PowerShell, or Terminal window on your PC where you have Platform-Tools (ADB) installed.

Keep holding both buttons tightly. As soon as you see the "Nokia" logo flash on the screen, release only the Power button while continuing to hold the Volume Down button.

The standard manual method often fails because users release the buttons too early or late. Follow this optimized sequence for a higher success rate:

Keep both buttons pressed for about until you see the FASTBOOT mode text or the Nokia logo with “Fastboot” written at the top or bottom.

Choose and click Android Bootloader Interface to force-install the connection driver. How to Exit Fastboot Mode Safely

: Type the following command and press Enter: adb reboot bootloader

While holding , press and hold the Power button .

Your Nokia T10 will automatically restart into Fastboot mode. ⚠️ Troubleshooting Connection Issues

Using Android Debug Bridge (ADB) eliminates human error regarding button-press timing. This is the preferred method for developers and advanced users. 1. Prepare Your Tablet Go to > About Tablet .

If you are having trouble, here are a few solutions to common problems:

: Your tablet will restart directly into Fastboot mode. You can check the connection by typing fastboot devices . How to Exit Fastboot Mode If you get stuck or are finished with your tasks:

The most reliable and "better" way to enter Fastboot mode, especially if your volume buttons are acting up, is using ADB commands from your computer. On your Nokia T10, go to .

If your Nokia T10 can boot into Android normally and you've already set up USB debugging, ADB commands offer a one-click solution.

If you find yourself stuck or have finished your tasks, use these steps to return to normal operation: Manual Restart : Hold the Power button