Icom Ic-f310 Programming Software |link| Jun 2026

Elias keyed the mic. "Testing, one-two. Welcome back to the world."

Once you have the software installed and the cable connected, follow this procedure to program your radio.

Go to and save this original configuration file in a safe folder. Step D: Editing Frequencies and Settings Icom Ic-f310 Programming Software

Under , change the COM Port Number to COM1 or COM2 .

Connect the OPC-474 cable to the PC and the 3.5mm jack into the IC-F310 microphone port. Power Up: Turn on the IC-F310. Elias keyed the mic

Q: What is the Icom IC-F310 programming software used for? A: The Icom IC-F310 programming software is used to configure and manage the settings of the Icom IC-F310 two-way radio.

If using a later Windows-based version of the utility, you must run the executable as an Administrator in Windows XP (Service Pack 3) Compatibility Mode. Go to and save this original configuration file

This indicates that the software cannot communicate with the radio. Verify that the radio is powered on, check that you selected the correct COM port, and ensure the RJ-45 plug is pushed firmly into the mic jack.