By following this guide, you can easily download and install Pylontech Battery View 3028 and start optimizing your battery performance today!
The following is required to successfully update the battery firmware: • New BatteryView for Pylontech battery. Can be found here. Segen South Africa
Monitors individual cell voltages, pack temperatures, and state of charge (SoC).
The software acts as a direct interface between a PC and the battery’s internal Battery Management System (BMS). Its primary capabilities include:
is required. Specifically, US-series batteries typically use an RJ11 or RJ45 connector on the battery end. The software communicates at a standard baudrate of Software Dependency: The application typically requires Microsoft .NET Framework 3.5 or newer to run on Windows. Power Forum Critical Usage Tips
: Provides a "Cell Analysis" tab to view individual cell voltages and temperatures, helping to identify faulty cells that may cause system imbalances.
Before launching the software, plug in your USB-to-Serial cable. Open Windows Device Manager to verify that the virtual COM port is recognized. Update the driver if an exclamation mark appears. Step 2: Extract and Launch
For users of Pylontech lithium batteries, (and the more recent 3.0.37 ) is the essential software tool for monitoring real-time performance, diagnosing cell imbalances, and extracting data logs for technical support. While Pylontech’s manual often lacks detailed instructions on data extraction, this software allows you to "see inside" the battery management system (BMS) to view critical metrics like cell voltage, temperature, and cycle counts. Key Functions of BatteryView
Start BatteryView, connect to the single battery via the console port.