Sscom V5.13.1 English Version

When a developer opens , they are greeted by a clean, functional interface. They select their COM port, set the Baud rate (usually 9600 or 115200), and hit "Open."

is a lightweight, robust serial port debugging tool widely used by hardware engineers, embedded developers, and IoT enthusiasts. Developed originally by Nie Xiaoyu (Ding Ding Shrimp), SSCOM bridges the gap between Windows PCs and microcontrollers like Arduino, STM32, ESP32, and LoRaWAN modules. Sscom V5.13.1 English Version

SSCOM stands out for its zero-install portability and negligible system footprint. Simply extract the archive and run the executable. When a developer opens , they are greeted

You just flashed corrupt firmware. The MCU is stuck in system memory bootloader, waiting for 0x7F at 115200 baud. RealTerm is overkill; PuTTY can’t send raw hex cleanly. Sscom can: SSCOM stands out for its zero-install portability and

Drop down the menu to select your device. If your device is not listed, verify that your USB-to-TTL (CH340, FTDI, or CP2102) drivers are properly installed in the Windows Device Manager. 2. Set the Baud Rate