: Select the Fiber cable (orange dashed line). Connect the SFP/fiber port of your modular device to the remote fiber device. Verifying the Link Status
: Green lights indicate a successful physical layer connection. Red lights indicate a mismatch or a powered-down interface.
Cisco Packet Tracer is a network simulation tool developed by Cisco Systems. It allows users to design, configure, and troubleshoot networks in a virtual environment. Packet Tracer is widely used by students, educators, and professionals to learn and practice networking concepts, including routing, switching, and network design.
Add two endpoint PCs: place PC-A on the left and PC-B on the right. Step 2: Install the Hardware Modules media converter in cisco packet tracer link
Click the switch and ensure the power switch is turned OFF .
Select the Copper Straight-Through cable (solid black line). Connect a PC to a FastEthernet or GigabitEthernet copper port on the switch.
Connecting a copper cable to a fiber port—or vice versa—will result in a grayed-out connection or an error message saying the cable cannot be connected to that port. : Select the Fiber cable (orange dashed line)
Click the device and ensure it is (a green light should be visible on the physical tab). Connecting Copper Side :
Then ping across successfully.
the remote device to ensure the media conversion is transparently passing data. MSS Data Solutions IP addressing Red lights indicate a mismatch or a powered-down interface
Look at the list of modules on the left. Select (a 1-port Gigabit Ethernet Fiber interface module).
Turn off the device using the physical power switch (essential before changing modules).
Copper Ethernet is limited to 100 meters. Fiber optic lines can extend connections across kilometers.