Omron G8b-201-01 [new]

:

Do not substitute a relay for the G8B-201-01 without checking the PCB layout. The G8B-201-01 is a 4-pin SPST-NO . Forcing a 5-pin part into a 4-pin footprint requires jumper wires and is not reliable.

The blinker cycles at two to three times its normal speed. While this can happen if a bulb burns out, a weakened inner resistor circuit inside an aging relay can duplicate this reaction. omron g8b-201-01

: Featured in the Honda V65 Sabre (VF1100S) and various 50cc scooters. Technical Specifications

When you activate your turn signals, the relay uses an internal electronic circuit to pulse power, causing the lights to flash on and off. This model is known as an . It's specifically designed for traditional incandescent bulbs, not LED lights. : Do not substitute a relay for the

If you are upgrading your classic Honda motorcycle from traditional incandescent factory bulbs to energy-efficient LEDs, the mechanical resistance profile changes. Because LEDs pull significantly less wattage, the OEM G8B-201-01 relay will interpret this low power draw as a dead bulb and trigger a hyperflash state.

The G8B-201-01 is the original, factory-specified flasher relay for several classic Honda motorcycle models. If your bike is on this list and you are experiencing turn signal issues, this is the correct replacement part. The blinker cycles at two to three times its normal speed

⚙️ As the G8B-201-01 is an OEM-specific part, you will not find it listed in a typical Omron relay datasheet or general electronics catalogs. It is a dedicated, application-specific component.

In the world of automotive electronics and industrial control systems, reliability is not a luxury—it is a necessity. When dealing with high-current loads, such as headlights, cooling fans, fuel pumps, or anti-lock braking systems (ABS), a standard low-power relay simply won’t suffice. This is where the enters the spotlight.

, are specifically pinned out to replace legacy Honda motorcycle flashers. Omron G8B-201-01 Modern Digital Replacement Technology Electromechanical, Load-dependent Technology Electronic, Solid-state or Constant-rate Bulb Compatibility Incandescent only Bulb Compatibility Mixed (Incandescent and LED) Response to Low Load Hyper-flashes or fails to blink Response to Low Load Maintains fixed 85 blinks/min Heat Dissipation Low to moderate Heat Dissipation Negligible Step-by-Step Replacement Guide Disconnect your motorcycle battery. The G8B-201-01

Approximately 85 blinks per minute under standard load.