Disco 240 Dmx Controller Manual Hot! Jun 2026

(Note: exact labels vary by hardware; use your unit’s panel labels when following steps.)

Regular maintenance is essential to ensure the optimal performance of your Disco 240 DMX controller:

A scene is a static snapshot of your light arrangement. The controller can store multiple banks of scenes.

: Press and hold the Program button for three seconds until the indicator LED next to it begins to blink. disco 240 dmx controller manual

Press one of the six Chase buttons (1–6) to select the sequence you want to program.

Ensure the Program and Auto LEDs are turned off. Select your desired Bank using the Up/Down buttons, then manually tap Scene buttons 1–8 to change the looks instantly.

Disco 240 DMX Controller is a versatile lighting console designed to manage up to 12 fixtures (scanners) with up to 16 channels each, totaling 240 DMX channels (Note: exact labels vary by hardware; use your

Up to 12 chases (scenes), each with a maximum of 40 steps. Total Capacity: 480 total chase steps across all programs. Memory: 128 K high-capacity internal memory. Display: 16x2 character LCD. Output: 3-core XLR pin socket. Control Panel Layout Functionality Scanner Buttons (1-12) Selects the specific fixture you wish to control. Faders (Sliders)

Note: Some fixtures use 5-pin XLR – adapters are available.

6 chases can be programmed, with up to 40 steps each. Modes: Auto, Music, or Manual mode. DMX Output: Standard 3-pin XLR connection. 2. Initial Setup and Safety Press one of the six Chase buttons (1–6)

For high-energy events like dance sets, use the internal microphone to drive the lighting:

A chase is a series of scenes played back in order (e.g., red → green → blue → strobe).

You likely omitted a DMX terminator. Plug a 120-ohm DMX terminator into the output of the final light fixture.