!free! - Kk1024udbin Install

Tags: Firewire, 1394

A 1394 Net Adaptor Connection is basically Win2k/XP's way of telling you that you have a Firewire interface installed in your system.

IEEE 1394 is more commonly known as Firewire and is mostly used to connect to peripherals such as digital cameras, camcorders and some external hard drives. It can also be used to network two Firewire-equipped systems together, achieving 12.5 to 50MBps transfer speeds. Firewire networking use is limited because of its 15ft cable length limitation.

User Reviews/Comments:

rate: avg: kk1024udbin install

by chris - 2006-04-13 10:40

I didn't think I could do anything with my 1394 net adaptor, but when I bridged the connection with my lan connection, data transfer is so much faster now.

by frank - 2006-04-26 16:20

How did you bridge the two please?

Frank

by conefor4200 - 2007-04-19 12:39

1.The device manager has a red X on the 1934 net adapter.

2.A bluetooth epox earset is not able to connect.

3.Any connections?

4.Any driver suggestions?

by Venkata Naveen - 2007-08-02 19:32

Right-click on it and select Enable..That should do it.

by anonymous - 2007-09-16 13:26

Why do I have the 1394 Net Adaptor. Its not something I have ever intentionally loaded and seems to REALLY slow my internet interaction? What will be the result if I uninstall it?

by anonymous - 2008-04-29 00:17

Chris,
You don't say how to bridge the firewire and lan connections. Just enabling them on my inspiron 700m does not connect them. My 1394 net adapter is enabled but I cannot get an internet visual from it even though it says that I am connected. My lan connection is enabled and I can access the internet from it but I do not get the higher speed of the 1394 net adaptor. Has anyone been successful at effecting a bridge as Chris infers?

by anonymous - 2008-06-20 22:30

ignore the bridging thing - 1394 is just for plugging in cameras etc as stated & for data transfer between plugin & computer

!free! - Kk1024udbin Install

Download the verified package from your infrastructure's internal portal or authorized distribution channel.

Mastering the KK1024UDBIN Install: Complete Hardware and Software Setup Guide kk1024udbin install

Connect the device to your computer using the provided interface cable (usually a or a direct high-speed data cable). If you have landed on this page, you

If you're considering using the KK1024UD Bin installer, ensure that: a manufacturer’s obscure README file

If the console does not recognize the file, ensure the filename is exactly KK1024UD.BIN and that the USB drive is not larger than 32GB, as some older consoles struggle with high-capacity drives.

If you have landed on this page, you are likely staring at a terminal prompt, a manufacturer’s obscure README file, or a forum post from 2015 regarding a router, a smart TV motherboard, or an industrial ARM controller. You need to understand what kk1024udbin is and how to execute the install command safely.

by Bumbershoot - 2013-04-04 08:21

I was having problems with my LAN connection (Logitech squeezebox set up - data stream kept dropping out/connection failing - on and off for YEARS).

Tried "bridging" 1394 and LAN - FIXED!!

Presumably the 1394 and LAN cards were somehow interfering with each other (fighting over resources and confusing the OS?) and now they are in harmony with each other.

Next I'll try disabling the 1394 completely but for now I'm just going to enjoy some music :-)

by Ryan - 2013-04-30 11:05

i have a windows xp desktop and i had a virus on it that wouldnt let me access it. so i used the windows xp professional installation disc to fully recover it and make a clean slate. It suddenly got rid of my local area connection (i have a yellow ethernet cable plugged into the wall) and all it says is i have a 1394 connection. im thinking that windows xp professional installation disc just decides to install it on (1394 network adapter). im not sure how to get rid of it, i could buy a wireless adapter but id rather just connect with an ethernet cord if i can. any suggestions?

by SirDilligaf - 2013-10-27 12:20

To bridge the 1394 connection and the local area connection.
(1) Disable both.
(2) Select both ( drag or use control click just highlight both connections )
(3) right click within the high lighted area and choose bridge connections
that should bridge them.

Popular

Recent