The DVB01 is a versatile, high-precision digital window voltage comparator module widely used in DIY electronics, automotive systems, industrial automation, and battery management setups. Designed to monitor real-time DC voltage, it allows users to set precise upper and lower voltage limits to control an onboard relay.
The module uses two tactile pushbuttons labeled and SW (Switch) to navigate the onboard menu and adjust variables. Step 1: Selecting the Function Mode (F1 - F5)
Once the DVB01 is set up, the user manual guides you through the configuration and settings process. This may include:
: The relay contact remains disconnected from the COM port during idle states. It closes and connects to COM when the relay triggers. dvb01 user manual
Similar to Function 3, but with customizable logic for voltage-driven load switching.
The core function of the DVB01 is finding digital channels. The manual will describe:
Like any electronic device, the DVB01 may encounter issues during operation. Here are some common issues and their solutions: The DVB01 is a versatile, high-precision digital window
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The is a multifunctional digital voltage monitoring controller used for precision voltage measurement and circuit control. It is widely used in charge/discharge monitoring, overvoltage/undervoltage protection, and automated voltage relay switching. Key Technical Specifications
This technical manual provides a comprehensive overview of the DVB01 module, its technical specifications, wiring configurations, and step-by-step programming procedures. Technical Specifications Step 1: Selecting the Function Mode (F1 -
Less than 90mA at 12V (less than 12mA when the relay is not engaged).
Once values are set, long press [SET] to save the program and return to standard operation mode. Wiring & Stability Tips
Short press a third time. The screen will flash T1 , followed by a time value (e.g., 00.0 seconds).