Windows Server 2012 R2 Boot Repair ((hot)) [Browser Plus]

If boot record repairs are unsuccessful, the issue might be due to corrupted system files.

If your server uses , you must repair the EFI partition instead:

Navigate to > Advanced Options > Command Prompt . Step 2: Identify Your Boot Architecture (BIOS vs. UEFI) windows server 2012 r2 boot repair

Note: DISM requires a source. If it fails, you may need to specify a /source pointing to the \sources\install.wim on your installation media.

Windows Server 2012 R2 Boot Repair: A Comprehensive Guide to Resolving Startup Issues If boot record repairs are unsuccessful, the issue

To run repair commands, you must boot into the Windows Recovery Environment using the original installation media.

Open via installation media (as shown in Method 1). Type diskpart and press Enter. UEFI) Note: DISM requires a source

If Startup Repair fails, use the (located under Advanced options ) to manually fix the boot files:

After running the commands, reboot your server to see if it boots normally.

The steps above address the most common boot failures. However, server administrators may encounter more complex situations.