Press the button again; the light will begin to flash as it scans.
Press and hold the corresponding (TV, CBL/SAT, DVD, or AUX) on the remote. The LED indicator light will turn on and remain solid.
Press and hold the corresponding Device Button (e.g., TV ) on the RM-0145 for approximately 3 seconds until the LED indicator light turns solid red, then release the button.
Audio receivers, soundbars, and miscellaneous media equipment. Key Functionalities Power/Standby: Turns the selected device on or off. rm-0145 manual
The RM-0145 is a multi-device universal remote control designed to consolidate up to four separate audio/video components into a single handheld unit. Device Selection Buttons
This is the easiest method if you do not know your TV's specific code. Point the remote directly at the TV.
Use this method if your appliance brand is not listed in the standard code index. Ensure the target appliance is powered on. Press the button again; the light will begin
Look for sample circuits: motor start/stop, alarm triggering, and interlock systems.
To get your RM-0145 up and running, follow these physical placement and power initialization steps. Physical Placement
The RM-0145 supports multi-device macro sequencing, allowing users to trigger a series of actions with a single command string. Creating a Macro Sequence Enter the Programming Menu on your control interface. Press and hold the corresponding Device Button (e
Press the key again; the light will begin flashing, indicating it is searching.
Press and hold and POWER simultaneously until the indicator light stays on.
Go to to create a new category (e.g., "Monthly Sales").
Use this method if your device brand is not listed in standard code sheets, or if the direct codes fail to work. the target device manually.
The remote requires two AAA batteries. Do not mix old and new batteries or different brands to avoid leakage and poor performance.