| Issue | Solution | |-------|----------| | Crashes on Windows 10/11 | Set Flexi.exe + ProductionManager.exe to Windows 7 + Admin | | No cutter detected | Install cutter as "Generic Text Only" printer → rename to "Vinyl Cutter" | | Tracing bitmap is slow | Reduce source image to 300 DPI before importing | | Weeding too hard | Reduce contour cut depth in cutter driver | | Missing fonts in design | Install fonts before launching Flexi, or refresh font cache |
Installing requires careful attention to system compatibility and hardware keys, as it is a legacy version of the software. While originally designed for older Windows versions, it can run on modern systems with specific adjustments. System Requirements
Do the "hot" install only on an offline, air-gapped computer (a PC never connected to the internet). Use it exclusively to run legacy jobs for older hardware. Keep your production network clean.
Open the Production Manager. If you are not actively outputting a design to a cutter, delete any idle or unused setup devices. Change the port communication setting from "Poll Port" to "Direct Output" to stop the software from constantly searching for hardware. Manage Windows Power Plan
This site was born out of a need, and now look at us, we are strong and ready to help our fellow twitchers to untwitch and get on with their lives without too much of data transfered in the process. We have also thought 20hr videos may not always be what you're looking for, so don't forget to adjust start and end of the video stream to download. Our system will always offer to download about 1hr long chunk from the start of the video, if said video is much longer than 1hr. Do not be surprised. This is done to avoid timeouts and broken downloads.
Also we cannot provide exact filesizes, doing so would require multiple additional servers that would scan 100s of small files, so.. no, we can only offer estimated file sizes.. That said, always check with the info online to see how much of a download to expect. 1hr or shorter videos may have an exact size listed, 1hr can be as much as 300-500 files involved in the stream... We will write more about it in the blog.
| Issue | Solution | |-------|----------| | Crashes on Windows 10/11 | Set Flexi.exe + ProductionManager.exe to Windows 7 + Admin | | No cutter detected | Install cutter as "Generic Text Only" printer → rename to "Vinyl Cutter" | | Tracing bitmap is slow | Reduce source image to 300 DPI before importing | | Weeding too hard | Reduce contour cut depth in cutter driver | | Missing fonts in design | Install fonts before launching Flexi, or refresh font cache |
Installing requires careful attention to system compatibility and hardware keys, as it is a legacy version of the software. While originally designed for older Windows versions, it can run on modern systems with specific adjustments. System Requirements flexisign pro 105 install hot
Do the "hot" install only on an offline, air-gapped computer (a PC never connected to the internet). Use it exclusively to run legacy jobs for older hardware. Keep your production network clean. | Issue | Solution | |-------|----------| | Crashes
Open the Production Manager. If you are not actively outputting a design to a cutter, delete any idle or unused setup devices. Change the port communication setting from "Poll Port" to "Direct Output" to stop the software from constantly searching for hardware. Manage Windows Power Plan Use it exclusively to run legacy jobs for older hardware