Attach the front stabilizer (the one with wheels) to the front of the main frame using the provided carriage bolts and nuts. Attach the rear stabilizer to the back of the main frame.
Immediately stop use. Check that the tracking wheels are sitting flush on the rails and are free of dirt, hair, or debris. Clean the track with a damp cloth and re-apply lubricant.
Weight stack guides, selector rod, and weight plates (or resistance bands/cables depending on your specific sub-model variant).
Secure the bottom of the mast to the base beam using long hex bolts.
Verify that you have placed the left pedal in the left crank arm. If the left pedal is forced into the right side, it will ruin the threads.
Fix the padded seat and backrest onto the brackets using smaller machine screws, ensuring the vinyl is aligned straight. Step 3: Top Frame and Overhead Lat Tower Assembly
Even with the proper manual, you may encounter issues. Here are a few common challenges and how to solve them:
This comprehensive guide serves as your unofficial assembly manual. It breaks down the step-by-step construction, pulley routing, and maintenance requirements to get your machine running smoothly. Pre-Assembly Preparation
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.