Fret Work Step-by-step Pdf Portable -
Starter Holes & Internal Cuts
Use fine-grit sandpaper (220-grit to 400-grit) to smooth away any remaining fuzz or burrs on the back side of the wood. For tight interior frets, fold a small piece of sandpaper or use micro-sanding needles to clean up the internal edges. Finishing Your Fretwork fret work step-by-step pdf
Stop when the black Sharpie ink is gone from all frets. If a small black dot remains, that fret is lower than others and needs more work. Starter Holes & Internal Cuts Use fine-grit sandpaper
Continue sanding until the Sharpie marks have been completely removed from the tops of frets. The black marker will remain in the low spots or "divots" that need more work. Once the marker is gone from the high frets, you will have a uniform plane. If a small black dot remains, that fret
Fret wear is often invisible to the naked eye. A player might see dents, but they can’t see if the 12th fret is a fraction of a millimeter higher than the 14th.
Cherry, walnut, maple, and mahogany cut cleanly and polish beautifully. Stick to thicknesses between 1/8-inch and 1/4-inch for intricate designs.
A mechanical scroll saw is ideal for speed and accuracy. A manual hand-fret saw offers maximum control for delicate pieces.